掺锗提高VO2薄膜的相变温度机理研究

二氧化钒(VO₂)作为一种长久以来备受关注的新型可逆相变材料,发展潜力巨大,其相变温度(T_MIT)的调控一直是研究热点。本文主要利用锗离子作为掺杂离子探索其对VO₂薄膜T_MIT的影响,并尝试解释其内部作用机理。在约1 cm²大小抛光的氧化铝薄片上沉积了一系列含不同比例锗离子VO₂薄膜。研究发现锗离子作为掺杂离子确实有利于T_MIT的提高(本课题T_MIT最大可达84.7 ℃)。T_MIT提高的主要原因是锗离子的引入能够强化单斜态V-V二聚体的稳定性,进而增强单斜态的稳定性,使得低温单斜态向四方金红石态转变更加困难。     

Information percolation and cutoff for the random‐cluster model

We consider the random‐cluster model (RCM) on with parameters p∈(0,1) and q ≥ 1. This is a generalization of the standard bond percolation (with edges open independently with probability p) which is biased by a factor q raised to the number of connected components. We study the well‐known Fortuin‐Kasteleyn (FK)‐dynamics on this model where the update at an edge depends on the global geometry of the system unlike the Glauber heat‐bath dynamics for spin systems, and prove that for all small enough p (depending on the dimension) and any q>1, the FK‐dynamics exhibits the cutoff phenomenon at with a window size , where λ_∞ is the large n limit of the spectral gap of the process. Our proof extends the information percolation framework of Lubetzky and Sly to the RCM and also relies on the arguments of Blanca and Sinclair who proved a sharp mixing time bound for the planar version. A key aspect of our proof is the analysis of the effect of a sequence of dependent (across time) Bernoulli percolations extracted from the graphical construction of the dynamics, on how information propagates.     

消光式核壳二聚体传感器的设计与光谱特性分析

根据ITO/Au纳米核壳二聚体粒子在生物医学领域的应用合理性,设计了一种实时检测生物液体的核壳二聚体探针消光式传感器;由偶极子理论推导出输出波长与外界环境折射率关系;利用MATLAB设计ITO/Au纳米核壳二聚体粒子结构;采用软件DDSCAT7.3结合离散偶极近似法,利用二聚体有效半径模拟计算了300~950nm可见光到红外光波段不同核壳比、二聚体间距、以及不同介质折射率的消光光谱;根据传感芯片折射率与偶极共振、耦合八级共振的响应关系得出ITO/Au二聚体的折射率灵敏特性。与传统Ag/Au核壳纳米粒子相比,ITO/Au纳米核壳二聚体结构引入了可作为传感芯片灵敏性自参考参数的耦合八级共振峰,同时ITO/Au二聚体结构的折射率灵敏度可达到419nm/RIU。这些工作及其结果对制作消光式传感器具有重要的意义。     

“(Diphosphine)Nickel”‐Catalyzed Negishi Cross‐Coupling: An Experimental and Theoretical Study

The use of a strongly donating “(bis‐dialkylphosphine)Ni” fragment promotes the catalytic coupling of a large range of ArCl and ArZnCl derivatives under mild conditions. Stoichiometric mechanistic investigations and DFT calculations prove that a Ni⁰/Ni^II cycle is operative in this system.     

Novel flame retardant paint based on Co(II) and Ni(II) metal complexes as new additives for surface coating applications

The study is focused on the synthesis of a new Co(II) and Ni(II) metal complexes, which is synthesized by the reaction of the isatin 4‐aminoantipyrine Schiff base ligand with selected divalent Co(II) and Ni(II) ions and their possible applications as flame retardant additives in paint formulations for surface coating application. The prepared metal complexes were characterized using a combination of Fourier transform infrared, elemental analysis, proton nuclear magnetic resonance, ¹³C‐NMR spectra, and mass spectroscopy. The prepared Schiff base ligand metal complexes were physically added to alkyd paint formulation to give coating formulations at a laboratory scale and then applied onto plywood and steel panels using a brush. The ignitability and oxygen index values obtained indicated that the paint which contained the prepared Co(II) and Ni(II) metal complexes as additives exhibited very good flame retardant. The physical and mechanical characteristics of the coatings were studied in order to estimate any disadvantages due to the incorporation of the additives. It was discovered that the added substances did not impact the hardness, flexibility, and adhesion of the prepared coating films. The gloss of the paint formulation film was improved due to the incorporation of the aromatic ring into the formulation and the level of the oil percent.     

Caesium carbonate supported on hydroxyapatite‐encapsulated Ni0.5Zn0.5Fe2O4 nanocrystallites as a novel magnetically basic catalyst for the one‐pot synthesis of pyrazolo[1,2‐b]phthalazine‐5,10‐diones

A novel nanomagnetic basic catalyst of caesium carbonate supported on hydroxyapatite‐coated Ni_0.5Zn_0.5Fe₂O₄ magnetic nanoparticles (Ni_0.5Zn_0.5Fe₂O₄@HAP‐Cs₂CO₃) was prepared. This new catalyst was fully characterized using Fourier transform infrared spectroscopy, transmission and scanning electron microscopy, X‐ray diffraction and vibrating sample magnetometry techniques, and then the catalytic activity of this catalyst was investigated in the synthesis of 1H‐pyrazolo[1,2‐b]phthalazine‐5,10‐dione derivatives. Also, Ni_0.5Zn_0.5Fe₂O₄@HAP‐Cs₂CO₃ could be reused at least five times without significant loss of activity and could be recovered easily by applying an external magnet. Thus, the developed nanomagnetic catalyst is potentially useful for the green and economic production of organic compounds. Copyright © 2015 John Wiley & Sons, Ltd.     

Stabilization of the Triplet Biradical Intermediate of 5-Methylcytosine Enhances Cyclobutane Pyrimidine Dimer (CPD) Formation in DNA

Cyclobutane pyrimidine dimer (CPD) is a photoproduct formed by two stacked pyrimidine bases through a cycloaddition reaction upon irradiation. Owing to its close association with skin cancer, the mechanism of CPD formation has been studied thoroughly. Among many aspects of CPD, its formation involving 5-methylcytosine (5mC) has been of special interest because the CPD yield is known to increase with C5-methylation of cytosine. In this work, high-level quantum mechanics/molecular mechanics (QM/MM) calculations are used to examine a previously experimentally detected pathway for CPD formation in hetero (thymine-cytosine and thymine-5mC) dipyrimidines, which is facilitated through intersystem crossing in thymine and formation of a triplet biradical intermediate. A DNA duplex model system containing a core sequence TmCG or TCG is used. The stabilization of a radical center in the biradical intermediate by the methyl group of 5mC can lead to increased CPD yield in TmCG compared with its non-methylated counterpart, TCG, thereby suggesting the existence of a new pathway of CPD formation enhanced by 5mC.     

Highly selective hydrogenation of acetophenone over supported amorphous alloy catalyst

Alpha-phenylethanol (PE) is an essential chemical in the field of medicine and synthetic perfumery. Therefore, in this work, we used a supported Ni–B–P amorphous alloy catalyst (Ni–B–P/SiO₂) in the hydrogenation of acetophenone (AP) to α-PE, which demonstrated excellent catalytic activity and selectivity, compared with Ni–B/SiO₂ (KBH₄ reduction of nickel salt). Ni–B–P/SiO₂ exhibited a high AP hydrogenation conversion of approximately 99%, whereas the PE selectivity reached up to 94%, which is approximately 1.4-fold higher than that of Ni–B/SiO₂ (about 69%), thereby directly proving the unique inhibition of AP hydrogenation over hydrogenation of P in the Ni–B catalytic system. The doped P in Ni–B–P/SiO₂ enhances the oxidation resistance and maintains the valence stability of Ni and B. Furthermore, sufficient experimental data were collected to determine the kinetic parameters. Based on the Langmuir–Hinshelwood model, we assumed that (i) AP and H₂ compete for adsorption on Ni–B–P/SiO₂; (ii) AP has strong adsorptive capacity on Ni–B–P/SiO₂; and (iii) PE coverage on the catalyst was negligible. Then, the dynamic equation was derived, which indicated that experimental data agree well with the dynamic model. Finally, the activation energy was confirmed to be 50.73 KJ/mol. This report will open up an avenue for the industrialization of amorphous alloy catalysts.     

Improvement of capacitance activity for Cu‐doped Ni‐based metal–organic frameworks by adding potassium hexacyanoferrate into KOH electrolyte

Cu‐doped Ni‐based metal–organic frameworks (MOFs) nanomaterials fabricated through a one‐pot hydrothermal reaction were characterized, and their performance as supercapacitor electrode materials was further studied for the first time. The results indicated that the doping of foreign metals and the introduction of K₃[Fe(CN)₆] in the KOH electrolyte significantly improve the performance of the supercapacitor. The results indicated that the Ni_2.6Cu_0.4 MOFs material shows the highest specific capacitance (1282 F g^?1 at 1 A g^?1 in mixed 2 M KOH and 0.1 M K₃[Fe(CN)₆]) and optimal capacitance retention (85.7% after 2000 cycles). This work provides a feasible optimization strategy for the construction of MOFs‐based supercapacitor electrode materials with excellent performance, and also provides a reliable experimental and theoretical basis for practical industrial production.